Shenzhen Genyu Optical Co., Ltd.
Shenzhen Genyu Optical Co., Ltd.
Add to Cart
FSTN (Film Super Twisted Nematic) Technology:
Detailed Parameters:
| 1 | Product Name | COG Graphic LCD Display |
| 2 | Model Number | GY12864-660 |
| 3 | LCD Type | FSTN(Gray), Positive |
| 4 | Polarizer Type | Transmissive |
| 5 | Viewing Angle | 6 O'clock |
| 6 | Resolution |
128x64 dots
|
| 7 | Drive Method | 1/65 Duty, 1/9 Bias |
| 8 | Working Voltage | 3.0V |
| 9 | Operating Temperature | -20~+70℃ |
| 10 | Storage Temperature | -30~+80℃ |
| 11 | FPC Connector | 20PIN, socket type |
| 12 | Connector | COG+FPC |
| 13 | Driver IC | ST7567 |
| 14 | Interface | 8-bit parallel, SPI |
| 15 | Backlight Type | 4-LEDs, White |
| 16 | Outline Dimension | 71.3(W)* 48.2(H)* 5.3(T) mm |
| 17 | View Area | 66.5(W)* 38.4(H) mm |
| 18 | Active Area | 60.775(W)* 32.935(H) mm |
| 19 | Dot Size | 0.45(W)* 0.49(H) mm |
| 20 | Dot Pitch | 0.475(W)* 0.515(H) mm |
Interfacing:
A 128x64 COG FSTN LCD can interface with microcontrollers through various methods, including parallel or serial (I2C/SPI) communication:
Parallel Interface: Involves multiple data pins to transfer the information, typically used in older or high-speed applications.
Serial Interface: A more modern approach where only a few pins (typically 2–4) are used for communication, making wiring easier and reducing complexity. I2C or SPI are commonly used.
Example Wiring (Using I2C for 128x64 COG FSTN LCD):
If the 128x64 COG FSTN LCD uses I2C, you can wire it as follows:
VCC → 5V (or 3.3V, depending on the display's voltage requirement)
GND → GND
SDA → A4 (on Arduino Uno)
SCL → A5 (on Arduino Uno)
FAQ=Frequently Asked Questions
1. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is located in Jiangxi Province.
2. Q: What is the process for custom samples?
A: Send inquiry -- Offer quotation -- Confirm quotation & Pay tooling charge -- Provide drawing -- Confirm drawing -- Make tooling & samples -- Samples finished -- Delivery via freight or sea collect.
3. Q: Can I get free samples?
A: Yes, 5-10 pcs of free samples will be provided after tooling.
4. Q: How long can I expect to get the samples?
A: Different product types will take different times. 2-5 working days for available models, and 28-30 working days for custom models.
5. Q: What is the minimum order quantity?
A: All our models have MOQ requirements, please get in touch with our salesman for detailed information.
6. Q: Can I get a lower price for LCD?
A: Yes, cheaper price with bigger/larger quantities order.
7. Q: How long is it for mass production?
A: Usually 25-40 days. It depends on different order quantities and part numbers.
8. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
9. Q: Can you provide the technical support?
A: Yes, We will provide detailed specifications and initialization code.